Moorage - TOHATSU BFT 60A Owner's Manual

Moorage

Tilt up the outboard motor using the
tilt lock lever when mooring the boat.
Shift the shift lever or the remote
control lever into the NEUTRAL
position and stop the engine before
tilting up the outboard motor.
Before tilting up, leave the outboard
motor in the running position for one
minute after stopping the engine to
drain the water from inside the
engine.
TILT LOCK LEVER
Stop the engine and disconnect the
fuel line from the outboard motor
before tilting the outboard motor.
OPERATION
TILT LOCK LEVER
FREE
LOCK
1. Raise the outboard motor as full as
it goes using the power trim/tilt
switch.
2. Move the tilt lock lever to the
LOCK position and lower the
outboard motor until the lock lever
contacts the stern bracket.
3. To tilt down, raise the outboard
motor as far as it goes using the
power trim/tilt switch, move the tilt
lock lever to the FREE position.
93