Nmea Interface Coupler; Operating Hour Notification System - TOHATSU BFT 60A Owner's Manual

CONTROLS AND FEATURES (Common)
Power Tilt
Press the power trim/tilt switch to
adjust the outboard motor tilt angle of
16° to 60°.
By using the power trim/tilt switch
the operator can change the tilt angle
of the outboard motor for shallow
water operation, beaching, launching
from a trailer, or mooring.
Please tilt up simultaneously, when
you mount the dual type outboard
motor.
If your outboard motor is equipped
with the tilt limit mechanism
(optional equipment for R type), you
can set the tilt limit angle. Contact
your dealer for more information.
32

NMEA Interface Coupler

The NMEA2000 interface coupler
can provide information regarding
engine speed, fuel consumption, and
various warnings to an existing
NMEA2000 network via an optional
interface cable. Contact your dealer
for more information.
NMEA INTERFACE COUPLER
Operating Hour Notification
System
This outboard motor engine counts
the number of operating hours since
the last periodic maintenance. When
the next periodic maintenance is due,
the engine notifies the NMEA2000
network, and a maintenance
indication is displayed on an
NMEA2000-compatible device.
After periodic maintenance is
performed, reset the hour counter by:
1.Stopping the engine.
2.Setting the gearshift at F or R.
3.Turning the ignition switch ON.
The buzzer will sound once.
4.Pressing the emergency stop switch
5 times within 20 seconds.
The buzzer will sound once when
the hour counter is reset.