Manual Relief Valve; Power Tilt Switch (Outboard Motor Pan) - TOHATSU BFT 60A Owner's Manual

OPERATION

Manual Relief Valve

MANUAL RELIEF VALVE
POWER
(To fix)
RIGHT STERN BRACKET
When power trim/tilt system does not
operate because of dead battery or
faulty power trim/tilt motor, the
outboard motor can be manually
tilted up or down by operating the
manual relief valve.
To tilt the outboard motor manually,
turn the manual relief valve under the
stern bracket three and a half turns
counterclockwise using a
screwdriver.
94
After tilting up/down manually, close
the manual relief valve to lock the
outboard motor in the position.
MANUAL
Check that nobody is under the
(To release)
outboard motor before opening the
manual relief valve. If the manual
relief valve is loosened (turned
counterclockwise) when the
outboard motor is tilted up, the
outboard motor will suddenly tilt
down.
The manual relief valve must be
tightened securely before
operating the outboard motor or
the outboard motor could tilt when
operating in reverse.
Power Tilt Switch
(outboard motor pan)
POWER TILT SWITCH
When you are away from the power
trim/tilt switch on the control lever or
on the tiller handle side, you can
operate the power tilt switch on the
outboard motor side.
The switch operation is the same as
that of the power trim/tilt switch on
the control lever or on the tiller
handle side.
Do not operate this power tilt
switch on the outboard motor while
sailing.