Display; Operator Display - Seakeeper 3 Operation Manual

Section 1: SYSTEM OVERVIEW

1.2 Display

The display shown below is the user interface to the Seakeeper 3 and should be mounted at the
primary helm station. It is used to start, operate, monitor and shutdown the Seakeeper. Sensors,
alarms and shutdowns are provided to allow unattended operation.
The display provides information in the event of an alarm. Alarms cause precession to stop and
the Seakeeper to start coasting down.
Product:
OPERATION
MANUAL
SEAKEEPER 3
FIGURE 4 – OPERATOR DISPLAY
Document #: Rev:
90379 1
Page:
5 of 8