Installing The Outdoor Unit - Sanyo SPW-CR1503GDYH8 Technical Data & Service Manual

4. Installation Instructions
4-2. Transporting
When transporting the unit, have it delivered as close to
the installation site as possible without unpacking.
Use hook for suspending a unit type 190 and 150.
Rope or strap must be settled
CAUTION
properly down at the bottom
of the hook, not at the edge
of the hook.
Remove one of the two bolts (M8) fixing the suspension
plate, and screw the Eye-Bolt (field supply) at the position
indicated. In the same way, attach the Eye-Bolts in the 4
positions.
Put the rope or strap through the hook of the Eye-Bolt.
When suspending a packaged unit, be sure to pass rope
through the suspension plate at the bottom.
Lift the unit with its weight balanced and evenly supported.
To prevent damage, use protective material (such as cloth
or cardboard) at all points where the lifting rope or strap
touches the unit.

4-3. Installing the outdoor unit

(1) Install a block or a solid platform under the outdoor
unit which provides a minimum height of 5 cm from
ground level.
Design of W-ECO MULTI SYSTEM

  

  
Protective cloth
or cardboad
Rope or strap
Suspension plate
II - 25
Rope or strap
Hook
1682_C_I
Protective cloth
or cardboad
Eye-Bolt
Rope or strap
Eye-Bolt (field supply)
Bolt (M8)
1691_C_I
Min. 5 cm
0028_C_I
TD831077
2