Auto-Flap Control; X, S, T Type; K Type - Sanyo SPW-CR1503GDYH8 Technical Data & Service Manual

18. Auto-flap Control

18-1. X, S, T Type

The auto-flap controls the air flow to one of the five vertical levels.
X type (4-way), S type (2-way)
Auto-flap
20°
F1
40°
F2
F3
F4
F5
Operation mode
Automatic setting
Cooling / drying
Fan
Heating
Heating preparation
(1) When the unit is stopped, the auto-flap returns to the F5 position.
(2) When the airflow direction is set manually (optional setting), the auto and swing settings will be released. To return
to automatic airflow direction, change the operation mode.
(3) Once auto-flap is set, it is input into the microcomputer memory.
(4) When the operation mode is changed, the unit begins a sensing operation. (If a search for sensing points does not
succeed in one minute, only the flap moves.)
Remote controller
configuration controller (RCS-SH80TG)
System
Auto-flap
Swing
Air direction setting
*1: Only possible when remote control unit is not used.
For group control, the settings are for the complete group.

18-2. K Type

When the "SWEEP" button is pressed, swing starts and when it is pressed again, the flap stops in place.
T type
F1
F2
60°
F3
F4
F5
Cooling F1~F3
Heating F1~F5
1267_M_I
Flap position
Manual setting
F2 F1 · F2 · F3 · swing
F2 F1 · F2 · F3 · F4 · F5 · swing
F4 F1 · F2 · F3 · F4 · F5 · swing
F2 (Original position after release)
Wired remote
Single Group control
‡ ‡
‡ ‡
VI - 15
Wireless remote controller
(RCS-SH80TGWL)
Single Group control
‡ ‡
‡ ‡
Processes and Functions
System controller
(SHA-KC64TG)
% (*1)
% (*1)
TD831077
6