Sanyo SPW-CR1503GDYH8 Technical Data & Service Manual page 122

2. Optional Controller (simplified remote controller)
Display (Remote controller)
3
A : This is displayed to indicate that the system controller is being used for control.
When
CENTRAL CTRL
B : When the unit is in the heating standby mode, the STANDBY indicator appears.
C : This displays the temperature setting.
D : This displays alarm messages when an error occurs.
E : This is displayed when using the temperature sensor in the remote control unit.
F : This is displayed only if an abnormality occurs within a unit.
G : The currently selected FAN SPEED is displayed.
H : When the TEST button is pressed, the TEST indicator appears.
I : The currently selected operation mode is displayed.
A
I
SET TEMP.
H TEST
A
G
FAN SPEED
MODE
FLAP
is flashing on the display, the operation is not accepted by the system controller.
Control of W-ECO MULTI SYSTEM
CENTRAL CTRL
STANDBY
°C
SETTING
CHECK
SENSOR
SET TEMP.
ON - / OFF -
TEST
Description
III - 64
A
B
C
D
E
F
1505_T_I
TD831077