Flyzone HADRON Manual page 6

7-3/4" [195mm] 4S strap
3S strap
7" [180mm]
Mount the battery using the included adhesive-back hook-and-loop material and the hook-and-loop straps cut to the length
shown. With the ElectriFly 3S or 4S 2200mAh 30C batteries (or other batteries similar in weight) mounted where shown, the
Hadron will balance within the recommended C.G. range. If using a heavier or lighter battery, fi rst determine where the battery
must be positioned to get the Hadron to balance within the range specifi ed on page 12.
When removing the battery, the hook and loop material is easily separated with a screwdriver.
6