Table of Contents
Advertisement
Quick Links
C
OMPLETE R
C
OMPLETE R
Quiet Electric Flight
Radio-Controlled Model
Requires 8 "AA" Alkaline
Batteries (not included)
Please read through this instruction booklet to THOROUGHLY familiarize yourself with the assembly
and flight characteristics of this airplane before beginning to assemble this model.
Please inspect all parts carefully before starting assembly! If any parts are missing, broken or defective,
or if you have any questions about the assembly or flying of this airplane, please call us at (217) 398-8970 and
we'll be glad to help.
Hobbico
, Inc. guarantees this kit to be free from defects in both material and workmanship at the date
®
of purchase. This warranty does not cover any component parts damaged by use or modification. In no case
shall Hobbico's liability exceed the original cost of the purchased model. Further, Hobbico reserves the right to
change or modify this warranty without notice.
In that Hobbico has no control over the final assembly, no liability shall be assumed nor accepted for
any damage resulting from the use by the user of the final user-assembled product. By the act of using the user-
assembled product, the user accepts all resulting liability.
If the buyers are not prepared to accept the liability associated with the use of this product, they are
advised to return this kit immediately in new and unused condition to the place of purchase.
Entire Contents © Copyright 2003 Printed in China
TF
AIRPLANE
TF
AIRPLANE
™
ASSEMBLE ONLY WITH ADULT SUPERVISION
WARRANTY
HCAZ3003 for HCAA1995 V1.0
™
Advertisement
Table of Contents
Related Manuals for Flyzone FlyZone
Summary of Contents for Flyzone FlyZone
- Page 1 In that Hobbico has no control over the final assembly, no liability shall be assumed nor accepted for any damage resulting from the use by the user of the final user-assembled product. By the act of using the user- assembled product, the user accepts all resulting liability.
- Page 2 GLOSSARY PROTECT YOUR MODEL, YOURSELF AND OTHERS. Receiver and Speed Control Unit: This unit controls the speed of FOLLOW THIS IMPORTANT SAFETY the motors. It also contains the receiver. PRECAUTION! Motors: The motors rotate the props to provide thrust. Your SWIFT FLYER is not a toy, but rather a sophisticated, working ™...
-
Page 3: Unpacking The Box
AIRFRAME PARTS AND HARDWARE UNPACKING THE BOX Part Name Qty. Check the parts against the list below. If any parts are 12. Wrench ........1 damaged or missing, give us a call at: (217) 398-8970. 13. Small Parts Bag ......1 14. V-Tail Attachment Bracket.....1 Part Name Qty. -
Page 4: Install The Landing Gear
Welcome to the world of R/C aeromodeling. You will find your new hobby to be exciting, very interesting, and most of all, a lot of fun. You have purchased, quite possibly, the best flying, the most reliable, and the easiest flying R/C airplane available today. Be sure to follow the written instructions and the video instructions completely and in detail. -
Page 5: Install The Propellers
ASSEMBLE & INSTALL THE WING 4. Place the wing onto the fuselage by sliding the two tabs located on the front of the center section of the wing into the fuselage as shown in the photograph above. 1. Remove the paper backing from the four pieces of double- sided tape on the main wing as shown in the above photograph. -
Page 6: Install The Transmitter Batteries
INSTALL THE TRANSMITTER BATTERIES • Caution: Do not use rechargeable (NiCd) batteries. • Do not mix old and new batteries. • Do not mix alkaline, standard (carbon-zinc) or rechargeable (NiCd) batteries. 3. Reinstall the battery hatch. 1. Place the transmitter antenna into the top of the transmitter case as shown above. -
Page 7: Battery Recycling
BEFORE GOING TO THE FIELD Note: Before attempting to operate or fly your Swift Flyer, please make sure you fully understand its entire operation outlined in this section. SAFETY PRECAUTIONS FOR CHARGING BATTERIES 1. Make sure the battery is fully discharged before charging. 1. - Page 8 HOW DOES THE SWIFT FLYER WORK? Note: The following is a detailed description of how you will control your Swift Flyer in flight once you are ready to go to the flying site for your first flight. Please study it carefully so you will become familiar with the operation of the transmitter.
- Page 9 Note: The Wind Direction Ribbon which you tied onto your transmitter antenna can also be used to indicate the speed of the wind and if you should fly your Swift Flyer or not. To use this ribbon in this manner use the process below: 6.
- Page 10 2. With the motors off, grasp the airplane fuselage and gently toss the airplane into the wind. It should glide straight ahead and settle gently to the ground. See the diagram below. If your plane dives (A) or stalls (B) follow the steps included below until you have a correct path (C).
-
Page 11: Range Check
5. To turn the SWIFT FLYER, move the right stick, left or right until the plane has turned. When the SWIFT FLYER is moving away from you, moving the right stick to the left will make your plane turn to the left. -
Page 12: After The Flight
Product Support Phone: 217-398-8970 Fax: 217-398-7721 E-mail: productsupport@hobbico.com Before starting to build, take an inventory of this kit to make sure it is complete, and inspect the parts to make sure they are of acceptable quality. If any parts are missing or are not of acceptable quality, or if you need assistance with assembly, contact Product Support.