Select a Sonar Source
When you first set up the network, the control head will automatically choose the transducer connected to it. Use the Network Source
Setup dialog box to change the sonar source.
The transducer you select on the 2D tab will provide the data for the 2D Sonar Views and related digital readouts.
If you select a Down Imaging transducer on the Adv. tab, it will provide the data for the Down Imaging Views and related digital readouts.
If you select a Side Imaging transducer on the Adv. tab, it will provide the data for the Side Imaging Views and related digital readouts.
19
Sonar Sources