Filter (Sonar View Only); Light; Beam Select (Sonar View Only) - Humminbird Fishin' Buddy MAX Operation Manual

Filter adjusts the sonar filter to limit interference on the display from
sources such as your boat engine, turbulence, or other sonar devices.
Light adjusts the brightness of the display. Use a higher backlight setting for
night fishing.
NOTE: Continuous backlight operation will significantly decrease the battery life for
Fishin' Buddy MAX units and PiranhaMAX Portables.
Beam Select sets which sonar returns from the transducer will be displayed on
the screen. The available beam frequencies are determined by your model.
16°
455kHz
28°
200kHz
28 Degree Total Coverage
Filter
Settings: On, Off; Default = Off, Setting Saved in Memory

Light

Settings: 0 to 5; Default = 0
Beam Select
Settings: 200 kHz, 455 kHz; Default = 200 kHz
• When set to 200 kHz, only the returns from
the 200 kHz (28°) wide beam will be displayed
in the Sonar View.
• When set to 455 kHz, only the returns from
the 455 kHz (16°) narrow beam will be
displayed in the Sonar View.
23
(Sonar View only)
(Sonar View only)
X-Press Menu