JAI CV-M10BX Operation Manuals page 23

*
WEN (VALID) Pulse Output
CV-M10 series camera generates and output WEN (Write ENable) pulse
at pin no.6 of 6P Multi connector when ext. trigger pulse is input at
pin no.5 of 6P Multi connector.
WEN pulse indicates a duration time of effective video signal
generated by the operation in Random Trigger Mode and Long Time
Exposure Mode, and it is useful to set a timing with frame gabber and
other image processing equipment.
- At 2:1 interlace mode, the video signal will be output at VIDEO 1 after
7HD (ODD) and at VIDEO 2 after 8HD (EVEN) both from the rising edge
of WEN pulse.
- At non-interlace mode, the video signal will be output after 14HD
from the rising edge of WEN pulse.
(Output Circuite
at
WEN
CV-M10
side
described
is
camera
Output
- 17 -
4Vp-p z!I 0.5V
as
follows.)