Playing; Selecting And Playing A Sound - Roland V-Piano Owner's Manual

Playing

Selecting and playing a sound

This section explains how to play the V-Piano.
The V-Piano contains 24 different "tones" (preset tones). Here's how to select and play these tones.
The sound will be interrupted when you switch tones, but this does not indicate a malfunction.
1.
Access the tone screen.
The tone screen will appear when you switch on the V-Piano's power.
If any screen other than the tone screen is shown, press the [EXIT] button.
2.
Press one of the [TONE 1]–[TONE 4] buttons.
With the factory settings, the following preset tones are assigned to the buttons.
[TONE 1] button:
[TONE 2] button:
[TONE 3] button:
[TONE 4] button:
fig.play-1.eps
3.
Try selecting other preset tones.
Make sure that the tone number is highlighted, and turn the [VALUE] dial.
This allows you to select preset tone numbers 001–024.
fig.play-2.eps
If the tone number is not highlighted, press the [EXIT] button.
34
No. 001 Vintage Piano 1
No. 008 Vintage Piano 2
No. 015 All Silver 1
No. 020 All Silver 2