Adjusting The Tonal Character (Equalizer) - Roland V-Piano Owner's Manual

Adjusting the tonal character (Equalizer)

The V-Piano contains a four-band equalizer which you can use to adjust the tonal character.
This equalizer applies to all sound that is output from the V-Piano.
1.
Press the [EQUALIZER] button.
The equalizer will turn on. The [EQUALIZER] button will light, and the equalizer screen will appear in the display.
fig.EQ-1.eps
2.
Use the [F1]–[F4] buttons and the [VALUE] dial to edit the equalizer parameters.
fig.EQ-2.eps
The equalizer screen contains a frequency response graph that shows the combined result of the four bands. The currently selected
band and its parameter settings are shown at the right of the graph.
• Use the [F1 (BAND -)] or [F2 (BAND +)] button to switch bands.
• Use the [F3 (▲)] / [F4 (▼)] button to select the parameter you want to edit.
• Turn the [VALUE] dial to edit the value of the selected parameter.
Band
LOW
LOW MID
HIGH MID
HIGH
(Common)
Some equalizer settings may cause distortion. If so, reduce the Input Gain.
3.
To turn the equalizer off, press the [EQUALIZER] button.
The [EQUALIZER] button will go out, and the previous screen will reappear.
By pressing the [EXIT] button you can return the previous screen while leaving the equalizer on.
Parameter Value
Gain -12–+12 dB
Freq 16–16000 Hz
Q 0.5, 1.0, 2.0, 4.0, 8.0
Type Shelving, Peaking
Gain -12–+12 dB
Freq 16–16000 Hz
Q 0.5, 1.0, 2.0, 4.0, 8.0
Gain -12–+12 dB
Freq 16–16000 Hz
Q 0.5, 1.0, 2.0, 4.0, 8.0
Type Shelving, Peaking
Input Gain -15–+15 dB
Description
Gain of this band.
Center frequency of this band.
Bandwidth. Higher values will narrow the frequency range of the band.
Shelving: This type boosts/cuts the region below the specified center frequency.
Peaking: This type boosts/cuts only the region around the specified center frequency.
Gain of this band.
Center frequency of this band.
Bandwidth. Higher values will narrow the frequency range of the band.
Gain of this band.
Center frequency of this band.
Bandwidth. Higher values will narrow the frequency range of the band.
Shelving: This type boosts/cuts the region above the specified center frequency.
Peaking: This type boosts/cuts only the region around the specified center frequency.
Adjusts the overall level of the equalizer.
Playing
37