Using The Pedals To Control The V-Piano's Functions; Functions That Can Be Assigned To A Pedal - Roland V-Piano Owner's Manual

Roland digital piano owner's manual
Hide thumbs Also See for V-Piano:
Table of Contents

Advertisement

Using the pedals to control the V-Piano's functions

You can assign various functions to the piano pedals and to pedals connected to the PEDAL FC1 jack and PEDAL FC2 jack, and use
these pedals to control the V-Piano.
You can assign functions to the left piano pedal and the center piano pedal.
The right piano pedal and the pedal connected to the PEDAL DAMPER jack will always operate as damper pedals. You
cannot change these assignments.

Functions that can be assigned to a pedal

Function
Operate as soft pedal
Operate as sostenuto pedal
Turn on/off MIDI output of
performance data
Play/stop the selected song
Turn transpose on/off
Move the playback position to the
beginning of the song
Adjust the volume of the entire V-
Piano
The V-Piano's volume
Adjust the ambience
Adjust the tone parameter
Recall the next setup
Recall the preceding setup
Parameters for which a check mark appears in the "Together with another function" column allow two functions to be
simultaneously assigned to a single pedal.
SETUP UP and SETUP DOWN can be selected only if the pedal settings are the settings stored in system memory.
The "Abbreviation in the tone screen" will be displayed when PEDAL has been set for Information Type (p. 80).
Together with
Value
another function
SOFT
SOSTENUTO
MIDI OUT SW
SONG PLAY/STOP
TRANSPOSE SW
SONG RESET
MASTER VOLUME
EXPRESSION
AMBIENCE LEVEL
SOUND LIFT
STRING RESONANCE
DAMPER RESONANCE
SOUNDBOARD RESO
KEY OFF RESONANCE
UNISON TUNE
HAMMER HARDNESS
CROSS RESONANCE
DECAY TIME
TONE COLOR
DAMPING TIME
DAMPER NOISE LEVEL
SETUP UP
SETUP DOWN
Abbreviation in
Remarks
the tone screen
Soft
Sosten
M.Out
PlayST
Trans
Linked with the [TRANSPOSE] button.
Reset
Linked with the utility screen's "1.
Volume
System–Master Volume."
Expres
AmbLvl
Linked with the [AMBIENCE] Knob.
S.Lift
S.Reso
D.Reso
The name of the tone parameter is
Sndbd
"Soundboard Resonance"
K.Reso
Tuning
Hammer
C.Reso
Decay
TColor
D.Time
D.Nois
SUP.Up
SUP.Dn
Playing
45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents