Roland V-Piano Owner's Manual page 61

6.
Assign a name to your setup. Press the [F2 (RENAME)] button.
fig.SetupSave03.eps
• The [VALUE] dial changes the character.
• The [F1 (INSERT)] button inserts a blank space.
• The [F2 (DELETE)] button deletes the character at the cursor location.
• The [F3] button moves the cursor one character to the left.
• The [F4] button moves the cursor one character to the right.
7.
When you've assigned the name, press the [ENTER] button or the [EXIT] button to return to the previous screen.
8.
Press the [F4 (EXECUTE)] button.
9.
A confirmation screen will appear.
fig.SetupSave05.eps
To save the setup, press the [F4 (OK)] button.
The screen will indicate "Executing..." while the data is being saved. Never turn off the power while this indication is shown.
If you decide not to save the setup, press the [F1 (CANCEL)] button or the [EXIT] button.
10.
When the setup has been saved, you will return to the utility screen.
Saving your settings (Setups)
61