Pedal Settings (4. Pedal) - Roland V-Piano Owner's Manual

Detailed settings for various functions (Utility screen)

Pedal settings (4. Pedal)

fig.UtilPedal.eps
Here you can make settings for the piano pedals and for the pedals connected to the PEDAL FC1 jack / FC2 jack.
Parameter
Piano Pedal Mode
Center Pedal Assign
Center Pedal Min
Center Pedal Max
Left Pedal Assign
Left Pedal Min
Left Pedal Max
Foot Controllers Mode
FC2 Assign
FC2 Min
FC2 Max
FC1 Assign
FC1 Min
FC1 Max
You cannot change the settings for the right piano pedal or the pedal connected to the DAMPER jack. These pedals will always
operate as damper pedals.
84
Description
Piano pedal settings can be saved within each setup (p. 59).
When you switch setups, this setting specifies whether the piano
pedal settings will change to the settings saved in that setup
(SETUP) or will not change (SYSTEM).
Specifies the function that will be controlled by the center piano
pedal.
Specifies the value sent when the center piano pedal is released.
Specifies the value sent when the center piano pedal is fully
depressed.
Specifies the function that will be controlled by the left piano
pedal.
Specifies the value sent when the left piano pedal is released.
Specifies the value sent when the left piano pedal is fully
depressed.
Settings for the pedals connected to the FC1 jack and FC2 jack
are saved within each setup (p. 59). When you switch setups, this
setting specifies whether these pedal settings will change to the
settings saved in that setup (SETUP) or will not change (SYSTEM).
Specifies the function that will be controlled by the pedal
connected to the FC2 jack.
Specifies the value sent when the pedal connected to the FC2
jack is released.
Specifies the value sent when the pedal connected to the FC2
jack is fully depressed.
Specifies the function that will be controlled by the pedal
connected to the FC1 jack.
Specifies the value sent when the pedal connected to the FC1
jack is released.
Specifies the value sent when the pedal connected to the FC1
jack is fully depressed.
Value Default Value
SETUP, SYSTEM SETUP
Refer to "Functions that
can be assigned to a SOSTENUTO
pedal" (p. 85).
(Minimum value for the
assigned function)
(Range of values for the
assigned function)
(Maximum value for the
assigned function)
Refer to "Functions that
can be assigned to a SOFT
pedal" (p. 85).
(Minimum value for the
assigned function)
(Range of values for the
assigned function)
(Maximum value for the
assigned function)
SETUP, SYSTEM SETUP
Refer to "Functions that
can be assigned to a SOSTENUTO
pedal" (p. 85).
(Minimum value for the
assigned function)
(Range of values for the
assigned function)
(Maximum value for the
assigned function)
Refer to "Functions that
can be assigned to a SOFT
pedal" (p. 85).
(Minimum value for the
assigned function)
(Range of values for the
assigned function)
(Maximum value for the
assigned function)