Roland V-Piano Owner's Manual page 47

7.
Use the [F3 (▲)] or [F4 (▼)] buttons to specify the states of the assigned function when the pedal is released and
when it is pressed to its maximum extent.
Parameters
Center Pedal Min
Left Pedal Min
FC2 Min
FC1 Min
Center Pedal Max
Left Pedal Max
FC2 Max
FC1 Max
The available values will depend on the function you've assigned.
8.
If you want to assign two parameters (that allow simultaneous assignment with another function), press the [F1
(ASSIGN1/2)] button to access the ASSIGN 2 screen.
9.
In the ASSIGN 2 screen, make settings for the second function.
fig.PdlAsgn04.eps
10.
When you've finished making settings, press the [EXIT] button to return to the previous screen.
By default, pedal settings are stored in the setup. If you want to keep the pedal settings you've made, save the setup (p. 60).
If desired, you can prevent the pedal assignments from changing when you switch setups. For details, refer to "Pedal
settings (4. Pedal)" (p. 84).
Description
Specify the state when the pedal is released
Specify the state when the pedal is pressed to the maximum extent
Playing
47