Changing The Keyboard's Split Point - Roland LX-10 Owner's Manual

Changing the Keyboard's Split Point

You can change the split point (the key at which the keyboard is divided).
The split point can be set to any value from B1 through B6.
This is set to "F 3" at the factory settings.
fig.SplitPoint-3-e.eps_78
A0 C1
fig.Panel-Split-e.eps
1.
Hold down the [Split] button and press a key set as the split point.
The key you pressed becomes the split point, and appears in the display.
fig.d-SplitPoint.eps
The key being used as the split point belongs to the left-hand section of the keyboard.
The previous display will reappear when you release the [Split] button.
The name of the left-hand tone is displayed while you hold down the [Split] button.
You can use the Memory Backup function to store this setting in internal memory (p. 89).
Split Point (Power-up default: F 3)
B1 C2 C3
Range in which you can specify the split point (B1–B6)
C4 C5
Performing
C6 B6 C7 C8
47