Roland LX-10 Owner's Manual page 53

4.
Press the [-] [+] buttons to select "All Song."
fig.d-AllSongPlay.eps
5.
Press the [Piano Designer] button twice.
You will return to the tone select screen.
Specifying the First Song
6.
Press the [Song] button so it's lit.
7.
Press the [-] [+] buttons to select the song.
8.
Press the [
The songs will play successively, starting with the selected song.
When the last song finishes playing, playback will return to the first song and then continue.
If you're playing in All Song Play mode, a symbol to indicate this is shown in the upper right of the
screen.
fig.AllSong-e.eps
The songs in internal memory will play consecutively if an internal memory song is selected, and the
songs in USB memory will play consecutively if a USB memory song is selected.
To Stop Playback
9.
Press the [
The next time you press the [
stopped.
You can use the Memory Backup function to store this setting in internal memory (p. 89).
By holding down the [Song] button and pressing the [
regardless of the Song Play mode.
] button.
All Song Play
] button so its illumination is turned off.
] button, playback will resume from the point at which you
Playing Back Songs
] button, you can play all songs
53