Equalizer Settings; Changing The Equalizer Settings (Equalizer); Equalizer - Roland LX-10 Owner's Manual

Equalizer Settings

Changing the Equalizer Settings

(Equalizer)

You can use the equalizer to modify the tonal character of the
sound by boosting or reducing just the low-frequency or high-
frequency range of the sound.
1.
Hold down the [Effects] button and press the
[3D] button.
2.
Use the [▲] [▼] buttons to select "Equalizer."
3.
Press the [ ] button.
The following appears in the display.
fig.d-EQ-Off.eps
4.
Press the [+] button to select "On."
fig.d-EQ-On.eps
5.
Press the [ ] button.
The equalizer setting screen appears.
fig.d-EQ-Number.eps
6.
Use the [▲] [▼] buttons to select an item.
fig.d-EQ-Param.eps
7.
Use the [-] [+] buttons to change the setting
for the selected item.
Item Value
EQ Number 1–4
High Gain -12–+12 dB
High Freq 1.25 k–16.0 k (Hz)
High Mid
-12–+12 dB
Gain
High Mid
16–16.0 k (Hz)
Freq
0.5, 1.0, 2.0, 4.0,
High Mid Q
8.0
Low Mid
-12–+12 dB
Gain
Low Mid
16–16.0 k (Hz)
Freq
0.5, 1.0, 2.0, 4.0,
Low Mid Q
8.0
Low Gain -12–+12 dB
Low Freq 100–1.0 k (Hz)
The sound may distort if you raise the gain value. If so,
NOTE
lower the master gain (p. 88).
Various Settings
Description
Selects a set of preset
equalizer settings.
Adjusts the level of the high-
frequency range.
Frequency point in the high-
frequency range. Generally,
this changes the level at and
over this frequency.
Adjusts the level of the mid-
to high-frequency range.
Frequency point in the mid-
to high-frequency range to
midrange. This changes the
level of the specified
bandwidth centered on this
frequency.
Changes the bandwidth of
the mid- to high-frequency
range. The bandwidth
affected by the controls
narrows as the value
increases.
Adjusts the level of the low-
frequency range to
midrange.
Frequency point in the low-
frequency range to
midrange. This changes the
level of the specified
bandwidth centered on this
frequency.
Changes the bandwidth of
the low-frequency range to
midrange. The bandwidth
affected by the controls
narrows as the value
increases.
Adjusts the level of the low-
frequency range.
Frequency point in the low-
frequency range. Generally,
this changes the level at and
below this frequency.
81