Error Messages - Roland LX-10 Owner's Manual

Error Messages

Indication
Error: 1 You can only read the music file. It can not be saved.
An error occurred during writing.
Error: 2 The external media's protect tab may be in the "Protect" (writing prohibited) position, or the external
media may not yet be initialized.
Error: 10 No external media is inserted. Insert the external media and try again.
There is not sufficient free memory in the save destination. Either insert other external media or delete
Error: 11
unneeded files and try again.
An error occurred during writing. The external media may be corrupted. Insert other external media and
Error: 14
try again. Alternatively, you can initialize the external media.
Error: 15 The file is unreadable. The data format is not compatible with the LX-10.
Data was not called up in time for playback of the song. After waiting several seconds, you may be able
Error: 16
to play back the song by pressing the [
This audio format is not supported.
Error: 18 Use audio data of a type that is supported.
For details on audio data formats, refer to "Audio data that the LX-10 can play" (p. 99).
Error: 30 The internal memory capacity of the LX-10 is full.
The LX-10 cannot deal with the excessive MIDI data sent from the external MIDI device. Reduce the
Error: 40
amount of MIDI data sent to the LX-10.
Error: 41 A MIDI cable has been disconnected. Connect it properly and securely.
Error: 43 A MIDI transmission error has occurred. Check the MIDI cable and connected MIDI device.
There may be a problem with the system. Repeat the procedure from the beginning. If it is not solved
Error: 51
after you have tried several times, contact the Roland service center.
The External Memory port was subjected to excessive current. Make sure that there is no problem with
Error: 65
the external media, then turn the power off, then on again.
* External Media: USB memory, Floppy Disk, CD-ROM, etc.
100
Meaning
] button again.