Changing The Keyboard's Split Point - Roland LX-10F Owner's Manual

Changing the Keyboard's Split Point

fig.Panel
A0 C1 B1 C2
1.
Hold down the [Twin Piano] button and press the key that you want to
be the new split point.
The key you pressed becomes the new split point, and that key will be shown in the
display.
When you release the [Twin Piano] button, the display will return to its previous
indication.
The changed setting will revert to its original state when you turn off the power.
If you wish, you can have this setting be remembered even while the power is turned off (p. 59).
Range in which you can specify the split point (B1–B6)
C3 C4
Split Point
Power-up default: F 3
The Split Point belongs to the left-hand section of the keyboard
C5 C6 B6
Performing
C7 C8
31