LX-15e System Program Version 1.11
This system program updates your LX-15e to the latest version 1.11.
How to know the version
Before you start, check the system program version of your LX-15e.
1. Hold down [ + ] and [ - ] and switch on the power to the unit.
If this shows the latest version (version 1.11 or later), there's no need to update
your LX-15e.
2. After verifying the displayed version, switch off the power.
Update history
[ Ver.1.11 ]
Additional Functions
A "Loading/Saving LX-15e Piano Setups" function was added.
Support for the
"Piano
Support for the
"Piano
What you will need to update your LX-15e
LX-15e
USB Memory ( Roland's M-UF1G or M-UF2G is recommended )
* The USB Memory need to be formatted on a LX-15e.
A computer with a USB connector (Windows 7 / 8, Mac OS X v10.4.3 or later)
Update file downloaded from this page
Cautions with the update
After you perform the update, Songs that have been saved in Favorite (internal
memory) will be deleted. You must copied the songs to the USB flash drive
before you perform the update. For details on the procedure, refer to the
following sections of the Owner's Manual.
- Copying a Saved Song
Designer" Android application was added.
Designer" iOS application was added.
© 2014 Roland Corp. U.S.