Changing The Keyboardõs Split Point; Changing The Volume Balance In Dual Play - Roland HP 535 Owner's Manual

Changing the KeyboardÕs
Split Point
When in Split mode, you can move the keyboardÕs
split point to any key from B1 to B6.
ÒF#3Ó is the power-on default for the split point.
F # 3 (Split Point)
B1
1. While pressing the [Split] button, press one of the
keys on the keyboard.
The pressed key becomes the split point.
<HP 535>
<HP 335>
The split point can also be changed using
the following two methods.
Method 1
1. Using the Value [+] and [-] buttons while press-
ing the [Split] button.
Pressing the [+] button once moves the split point
one key to the upper; pressing the [-] button once
moves the split point one key to the lower.
Method 2
1. Press the [Function] button.
The [Function] buttonÕs indicator lights up.
2. Press the [Split] button.
3. Using the Value [+] and [-] buttons, change the
split point.
4. Press the [Function] button.
The [Function] buttonÕs indicator goes out.
ÒChanging the Sounds Played by the Left and
Right Hands of the Keyboard Ñ The ÒSplitÓ
FunctionÓ (p.18)
Changing the Volume
Balance in Dual Play
You can change the volume balance between the two
layered sounds in Dual Play. Ò5-5Ó is the power-on
default for the balance (left-side button volume/right-
side button volume).
1. Press the [Function] button.
The [Function] buttonÕs indicator lights up.
B6
2. Press the [Key Touch] button.
3. Using the Value [+] and [-] buttons, adjust the
volume balance.
4. Press the [Function] button.
The [Function] buttonÕs indicator goes out.
<HP 535>
<HP 335>
ÒLayering Two Instrument SoundsÑ Dual PlayÓ
(p.17)
Changing Various Settings
45