Adding A Variety Effects To The Sound (Effects); Editing The Effect Settings - Roland LX-10 Owner's Manual

Performing

Adding a Variety Effects to the Sound (Effects)

In addition to reverb, you can apply a variety of effects to the LX-10's sounds.
These are referred to as "effects." With the factory settings, an effect suitable for each tone is
selected.
Effects may not be applied with some of sounds.
NOTE
fig.Panel-Effects-e.eps
1.
Press the [Effects] button so it's lit.
Try fingering the keyboard.
The effect is applied to the currently selected tone.
Some tones initially have effect applied. Selecting such a tone makes the [Effects] button light up
automatically.
Effects cannot be applied to audio data or a music CD.
NOTE
Turning Off the Effects
1.
Press the [Effects] button so its light is turned off.

Editing the Effect Settings

Here's how to edit the settings of the effect.
1.
Hold down the [Effects] button and press the [-] [+] buttons.
The screen will show the effect parameters and their values.
fig.d-EffectDepth.eps
The most suitable type of effect is assigned for each tone.
Depending on settings such as 3D Sound Control, the effect may not be applied in some cases.
NOTE
36