Roland LX-10 Owner's Manual page 71

4.
Press the [
The Initialize Media screen appears.
fig.d-Format.eps
5.
Use the [-] [+] buttons to select whether you will initialize Internal
Memory, External Memory (USB memory), or Disk (floppy disk).
6.
Press the [
A confirmation message appears.
fig.d-Format2.eps
If you press the [
7.
Press the [
Initialization will begin.
The entire contents of the selected memory will be erased.
Never turn off the power while "Executing..." is shown in the display.
NOTE
If the screen indicates "Error," please refer to "Error Messages" (p. 100).
NOTE
Initializing the LX-10's internal memory will not initialize settings other than the contents of internal
memory. If you want to return settings other than the contents of internal memory to their factory-
NOTE
set condition, execute the Factory Reset operation (p. 90).
Don't disconnect the USB memory until USB memory initialization has been completed.
NOTE
While a floppy disk is being initialized, do not eject the floppy disk from the floppy disk drive or
NOTE
disconnect the cable of the disk drive.
] button.
] button.
] button, you'll return to the previous screen without initializing.
] button.
Saving Your Performance
71