Config Menu - Honeywell Searchline Excel Cross-Duct Technical Handbook

MAN0889_Issue 3_03/13
Appendix A - Handheld Interrogator
Overrange ERR_EXCEL_OVERRANGE
Power Failed
ERR EXCEL_LOG_POWER_FAIL
Reset Occurred
ERR_EXCEL_RESET
Time Adjusted
ERR_EXCEL_LOG_TIME_ADJUST
Uncalibrated ERR_EXCEL_UNCALIBRATED
Volt Ref Fault ERR_EXCEL_VOLTAGE_REF_FAIL
Self Test
This option lets you start a system diagnostic self test.
The following message is displayed during the self test process:
The following message is displayed for three seconds at the end of a successful self test process.
Soft Reset
This option lets you reset the system.
This message is displayed during the reset process:
The following message is displayed for three seconds when the process is completed:
A.5.5 Config Menu
This sub menu lets you check the configuration parameters of the unit and update the user configuration
parameters. It has the following options:
Show Gas Show the gas related configuration parameters.
Show Config
Show the user related configuration parameters.
Show Install
Show the installation related configuration parameters.
Show Gas
This option displays the useful gas table configuration parameters in the following way:
An overrange signal has occurred.
The gas detector has suffered an internal power failure.
A gas detector reset has occurred.
The Excel log time has been changed.
The gas detector requires calibration.
Voltage reference fault detected.
Processing Data
Please Wait
Checks Passed
Processing Data
Please Wait
Unit Reset
cccccccccccccccc
vvvvvvvvv
65
Searchline Excel Cross-Duct Technical Handbook