Honeywell Searchline Excel Cross-Duct Technical Handbook page 60

MAN0889_Issue 3_03/13
Appendix A - Handheld Interrogator
where: tttttttt System type. The system type displayed is one of the following:
Display Text
Duct Mount
Note: It is not possible to change the system type. This is set during calibration and configuration of the
unit at the factory.
Path Length
The following message is displayed:
where: nnnn
The following ranges of path length can be entered:
System Type
Duct Mount
Self Test
This starts the system self test process. The following message is displayed:
When finished the interrogator displays the following message for at least three seconds:
The following message is now displayed:
Alignment
No alignment adjustments are provided for the Searchline Excel Cross-Duct. If the mechanical installation is
satisfactory Searchline Excel Cross-Duct can now be initialised.
Press Enter on the keypad and the display shows:
Path Length
nnnn
The path length in metres.
Minimum Range (m)
0.5
Self Test
Please Wait
Checks Passed
SIG:
TGT:
Signals OK
60
Searchline Excel Cross-Duct Technical Handbook
System Type
0.5 - 5m range system
v
Maximum Range (m)
5
Step Size (m)
0.1