Adding Reverberation To Sounds ([Reverb]); Changing The Reverb Effect Type; Changing The Depth Of Reverb Effect (Reverb Depth) - Roland RD-300SX Owner's Manual

Adding Reverberation to Sounds ([REVERB])

You can apply a reverb effect to the notes you play on the keyboard. With the reverb
effect, you obtain a pleasant reverberation, making it sound as if you were
performing in a concert hall or similar space.
fig.01-21
1, 2
1
Press [REVERB], getting its indicator to light.
Try fingering the keyboard.
The reverb effect is applied to the entire tone.
2
To eliminate the Reverb effect, press [REVERB] once more, extinguishing the
indicator.

Changing the Reverb Effect Type

You can select from four different reverb effect types.
1
While holding down [SHIFT], press [REVERB].
2
Press [INC] or [DEC] to switch the reverb type.
Displayed
ROOM
HALL
CATHEDRAL
GM REVERB
3
After determining the type, press [SHIFT] to return to the previous screen.

Changing the Depth of Reverb Effect (Reverb Depth)

You can select from 127 levels of depth for the reverb effect.
1
Hold down [REVERB] and press [INC] or [DEC] to change the depth of the
reverb effect.
Description
Reverb present in normal rooms
Reverb found in larger halls
Reverb of church cathedrals
Reverb for use with GM2
Performing with the Keyboard
Reverb depth settings can be
made independently for each
zone (p. 41).
27