Do A Check On The Operation Of The Lighting; Put The Ceramic Log Set On The Burner Bed - Bellfires Smart Bell 65 MF Installation And Maintenance Manual

Installation
4 4 .3.1

Do a check on the operation of the lighting

•
4.3.2

Put the ceramic log set on the burner bed

Safety conditions
Preparation
1.
2.
22
Make sure that the operation of the ambient lights function well. To operate the lights
with the remote control, refer to the user manual
Warning:
• Make sure that none of the openings of the ember grates (A) are blocked.
Blockage of the openings of the ember grates can lead to a dangerous
situation.
• Put the items of the log set in the correct configuration for the type of gas
burner. If you put the items of the log set in another configuration, a
dangerous situation can occur.
• Do not put anything against the pilot burner or in the protective pilot light
cowl (B).
• Only use the items that are supplied.
Make sure that all items of the log set are there. See
Put the ceramic ember grates on the lower and upper main burner, as shown below.
2.6
Refer to for the numbers of the items.
2.6
.
Smart Bell 65-55