Maintenance; Annual Maintenance; Clean The Appliance - Bellfires Smart Bell 65 MF Installation And Maintenance Manual

5 5

Maintenance

5.1

Annual maintenance

•
5.1.1

Clean the appliance

Safety conditions
Procedure
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Do a check for damage on the inside of the appliance, including these parts:
11. Clean the glass. Refer to
12. If the black mirror rear wall is installed in the appliance, clean the black mirror. Use
13. Prepare the appliance for use. Refer to
Smart Bell 65-55
Do all procedures in this section every year.
Caution:
• Use only original parts. Individual parts for replacement or accessories
are available from your BELLFIRES-dealer.
• Introduced modifications to the appliance are not permitted.
Caution:
• Turn off the gas supply to the appliance before cleaning.
• Turn off the power supply to the appliance before cleaning.
Remove the glass. Refer to
Remove the content from the burner bed.
Clean the removed content carefully with a soft brush.
Clean the inside of the appliance, including the main burner, the pilot light burner and
the flue system.
Remove the grate.
Clean the combustion air intake
a) Clean the combustion air intake
(A) at the bottom sides of the
appliance.
b) Clean the primary combustion
air inlet openings (B) of the main
burner (front and rear).
Clean the ambient light bulbs. Refer
5.2.6
to .
Clean the convection air route.
If the convection fan is installed in the appliance, clean the convection fan carefully.
Use a soft brush.
a) Main burner.
b) Pilot burner.
c) Combustion air intake.
d) Flue system. Use a flashlight if necessary.
glass spray or ceramic hob cleaner.
5.2.1
.
5.2.5 .
4.3
.
Maintenance
25