Adding An Eighty-Eight Amp; Owner And Warranty Registration Form - Rogue Audio Tempest Vacuum Tube Integrated Amplifier Owner's Manual

ADDING A ROGUE EIGHTY-EIGHT POWER AMP
One of the features of the Tempest is that a Rogue Eighty-Eight
power amplifier can be added at a later date to increase the system
power. It is important to use a Rogue Eighty-Eight amplifier so that
the power levels are equivalent between the two amplifiers for a given
input signal. It is also required that the speakers are capable of being
biamped (Separate inputs for tweeters and woofers) The procedure
for biamping is as follows:
1) Remove the shorting connection on the speakers between the
tweeter and woofer inputs.
2) Attach the Speaker wires from the Tempest to the tweeter
connectors on the loudspeakers.
3) Attach speaker cables from the Eighty-Eight amp to the woofer
connectors on the loudspeakers.
4) Connect the active outputs of the Tempest to the inputs of the
Eighty-Eight amp.

OWNER AND WARRANTY REGISTRATION FORM

Included with this manual is an Owner and Warranty Registration
Form. Please take a minute to fill out this card and return it Rogue
Audio.
Rogue Tempest Owners Manual 11