Page 1
Sphinx II Tube Hybrid Integrated Power Amplifier Owner’s Manual Rogue Audio, Inc. 3 Marian Lane Brodheadsville, PA 18322 Issue date: 08/01/16...
TABLE OF CONTENTS 1) Introduction 2) Unpacking the Sphinx integrated amplifier 3) Installing the Sphinx into your system 4) Operation of the Sphinx 5) Troubleshooting 6) Registration card 7) Fuse values 8) Specifications 9) Warranty...
We at Rogue Audio are extremely proud of our products and want you to enjoy them to their fullest potential. So please, take the time to read through this short manual so that you can be confident that you have set up your amplifier properly.
Connecting the Sphinx to other components: The input connections to the Sphinx are made via RCA jacks on the rear of the amplifier. The following connections are available: RIAA equalized phono preamplifier input (phono) Line 1 (CD player or other line level source) ...
OPERATION OF THE SPHINX Powering up the System - After all proper connections have been made, you are now ready to turn the Sphinx on. The main power on/off switch is on the rear of the amp. This “vacation switch” can be left on at all times and keeps the solid state portion of the amplifier in a standby state.
Included with your amplifier is an Owner and Warranty Registration Form. Please take a minute to fill out this card and return it to Rogue Audio. This card must be returned within 30 days of purchase to validate the warranty.
(hereinafter “Rogue Audio”) warrants this product against defects in material or workmanship as follows: With the exception of vacuum tubes, Rogue Audio warrants to the original purchaser of this product all parts of this product against defects in material and workmanship for a period of three years from the date of retail purchase.
Need help?
Do you have a question about the Sphinx II and is the answer not in the manual?
Questions and answers