Related Manuals for Rogue Audio Ninety-Nine
Summary of Contents for Rogue Audio Ninety-Nine
- Page 1 Date: 9/24/03 Rogue Ninety-Nine Vacuum Tube Preamplifier Owners Manual Vacuum Tube Amplifiers...
-
Page 2: Table Of Contents
TABLE OF CONTENTS 1) Introduction 2) Setting up your preamplifier 3) Operating your preamplifier 4) Maintenance 5) If there’s a problem 6) Specifications 7) Warranty Rogue Ninety- Nine Owners Manual... -
Page 3: Introduction
And with your Rogue Audio product, you can be sure that you are getting the very best in tube amplification. We at Rogue Audio are extremely proud of our products and want you to enjoy them to their fullest potential. - Page 4 “l” setting. An additional 10dB of gain can be realized by replacing the 12AU7 tubes with 12AT7 tubes. In this case the switches should be moved to the “h” position. This configuration is recommended for cartridge outputs of 0.4mV and Rogue Ninety-Nine Owners Manual...
- Page 5 Note: Be careful to ensure 3 and 6 pin sockets (Con A and Con B respectively) mate to corresponding plugs. See Figure 2. Power Supply Con A Output Jacks Phono Input Jacks Ground Headphone Jack Figure 2 Rogue Ninety-Nine Owners Manual...
- Page 6 There is also a headphone jack provided on the rear of the unit. The outputs to the power amplifier and tape recorder are arranged to the right of the input jacks. Be sure to use high quality interconnect cables - they do make a difference. Rogue Ninety-Nine Owners Manual...
-
Page 7: Operating Your Preamplifier
(do this using several different recordings as not all recordings are made with correct phase). OPERATING YOUR PREAMPLIFIER 1) Delays- Note that the Rogue Ninety-Nine is equipped with a slow turn-on feature that protects other equipment from dangerous transients at turn-on as well as significantly prolonging tube life. - Page 8 3) Switches and Controls - The Rogue Ninety-Nine is equipped with the following controls • Volume - gain adjustment from 0- 23 dB • Gain - a variable gain adjustment for source and speaker matching. • Source - selects source material (CD, phono, tape, tuner, aux) •...
-
Page 9: Maintenance
MAINTENANCE The Rogue Ninety-Nine has been designed to provide many years of enjoyable and reliable service. The greatest care has been taken to select vacuum tubes that provide superior sound and ensure long life. In addition, this unit utilizes a slow turn on feature that helps prevent cathode stripping during power up. -
Page 10: Specifications
1 Hz -150kHz + 1dB < 0.1% Gain - Line Stage 23 dB Rated Output 1.5 V RMS Maximum Output 50 V RMS Dimensions W- 18 ¼”, H- 5 ”, L- 14” Power Requirements 115/230 V - 50/60 Hz Rogue Ninety-Nine Owners Manual... -
Page 11: Warranty
Rogue Audio, lightening, power surges, or acts of God. Use of any other than Rogue Audio factory parts may void this warranty This warranty does not cover the cost of parts and labor that would be otherwise provided without charge under this warranty, obtained from any source other than Rogue Audio. - Page 12 These skills will be used to create products that offer outstanding value in the high-end marketplace. Rogue Audio amplifiers will always be engineered to provide the four key elements of audio value: •...
Need help?
Do you have a question about the Ninety-Nine and is the answer not in the manual?
Questions and answers