Subscribe to Our Youtube Channel
Related Manuals for Rogue Audio Rogue Sixty Six
Summary of Contents for Rogue Audio Rogue Sixty Six
- Page 1 Issue : 2 Date : 04/17/00 Rogue Sixty Six Vacuum Tube Preamplifier Owners Manual Vacuum Tube Amplifiers...
-
Page 2: Table Of Contents
Rogue Sixty Six Owners Manual TABLE OF CONTENTS 1) Introduction 2) Setting up your preamplifier 3) Operating your preamplifier 4) Maintenance 5) If there’s a problem 6) Specifications 7) Warranty... -
Page 3: Introduction
If you have never owned a vacuum tube preamplifier you will be thrilled by the silky-smooth sound and incredible detail that only a tube preamp can provide. We at Rogue Audio are extremely proud of our products and want you to enjoy them to their fullest potential. So please, take the time to read through this short manual so that you can be confident that you have set up your new preamp properly. - Page 4 (three inches or more) on the top, sides and rear for air flow. The external power supply placed as far away as possible from any other components or cables. Rogue Sixty Six Owners Manual Connect the IEC end of the Figure 1 Therefore, the preamplifier should be located...
- Page 5 If all else fails, try both connections and listen to which sounds better (do this using several different recordings as not all recordings are made with correct phase). Rogue Sixty Six Owners Manual...
-
Page 6: Operating Your Preamplifier
4) Remote Volume Control - The Sixty-Six LSR (line stage remote) is equipped with an analog remote volume control feature. The volume may be adjusted manually using the knob on the front panel, or by using the remote control provided. Rogue Sixty Six Owners Manual... -
Page 7: Maintenance
To prolong tube life, turn off the unit when not being used. The Rogue Sixty Six has been designed to provide many years of enjoyable and reliable service. The greatest care has been taken to select vacuum tubes that provide superior sound and ensure long life. - Page 8 Active/Passive Switch Active/Passive Switch 12AU7 Tubes (2) Line Stage Rogue Sixty Six Owners Manual Figure 2 Sixty-Six LSR Figure 3 Sixty-Six Phono 12AU7 Tubes (2) 6DJ8 Tubes (4) Phono Stage...
-
Page 9: If Theres A Problem
2) Check that all input and output signal connections are secure. 3) Ensure that all tubes are properly seated in sockets. 4) If these do not clear up the problem, please call Rogue Audio Technical Support at 570-992-9901. Rogue Sixty Six Owners Manual... -
Page 10: Specifications
- line stage gain - phono stage rated output maximum output RIAA accuracy dimensions power requirements Rogue Sixty Six Owners Manual SPECIFICATIONS 10Hz - 100kHz + 1dB < 0.1% 23 dB 40 dB 1.5 V RMS 50V RMS + 0.25dB... -
Page 11: Warranty
Rogue Audio, lightening, power surges, or acts of God. Use of any other than Rogue Audio factory parts may void this warranty This warranty does not cover the cost of parts and labor which would be otherwise provided without charge under this warranty, obtained from any source other than Rogue Audio. - Page 12 These skills will be used to create products that offer outstanding value in the high-end marketplace. Rogue Audio amplifiers will always be engineered to provide the four key elements of audio value: •...
Need help?
Do you have a question about the Rogue Sixty Six and is the answer not in the manual?
Questions and answers