Installing Peripherals (Optional); Utc-520Fp-Ika0E - Advantech UTC-520FP-IKA0E User Manual

3.2 Installing Peripherals (Optional)

3.2.1 UTC-520FP-IKA0E

1. Switch off the unit.
2. Locate the peripheral cable port you want to use.
3. Remove the rubber cap.
4. Open the peripheral cover accordingly.
5. Route the cable from the peripheral module through the cable port inside the
unit.
6. Connect the cable to the USB port.
7. Attach the peripheral module to the groove rail and let the cable sink into the
groove.
8. Fasten the 2 screws to fix the peripheral module in place.
9. Close the peripheral cover.
13 UTC-520 User Manual