Table of Contents
Advertisement
Rail Assembly
1
1
Extending the Rails
1
2
1
3
1
4
Slide rail mounted equipment is not to be used as a shelf or a work space.
Stability hazard. The rack stabilizing mechanism must be in place, or the
rack must be bolted to the floor before you slide the unit out for servicing.
Failure to stabilize the rack can cause the rack to tip over.
Figure 2-1. Separating the Rack Rails
Quick-Release
Tab
Separating the Inner
Rail Extension
2-5
Chapter 2: Server Installation
Separating the Inner and Outer Rails
1. Locate the rail assembly in the chassis
packaging.
2. Extend the rail assembly by pulling it
outward.
2
3. Press the quick-release tab.
4. Separate the inner rail extension from
the outer rail assembly.
F.
SCREW
1
SCREW
screw the handles the
outer rails for secure
purpose if necessary
Advertisement
Table of Contents
