Tgx20 - Dynacord TGX10 Installation Manual

24 en | Technical data
Shipping Weight
Amplifier at rated conditions; all channels driven, 4 Ω loads, analog input, 32 dB gain, 48 kHz
sample rate, unless otherwise specified.
1 Test signal for max. output power according IHF-A-202 (Dynamic-Headroom, burst 1 kHz/20
ms on/480 ms off/low level -20 dB).
8.2

TGX20

OUTPUT POWER
Load impedance
Maximum Output Power
All channels driven
Number of amplifier channels
Maximum Output Voltage
Maximum Output Current
AMPLIFIER
Voltage Gain
ref.1 kHz
Input Sensitivity
ref. to Max. Output Voltage
THD
3 dB below Max., AES17, 1 kHz
IMD-SMPTE,
60 Hz, 7 kHz
DIM100,
3.15 kHz, 15 kHz
Crosstalk
ref. 1 kHz, 12 dB below Max., 8 Ω
Frequency Response
ref. 1 kHz, analog in to speaker out
Damping Factor,
20 Hz to 200 Hz, 8 Ω
Output Stage Topology
Signal to Noise Ratio
A-weighted, analog input
A-weighted, digital input
Output Noise
A-weighted, analog input
A-weighted, digital input
DIGITAL SIGNAL PROCESSING
2018.05 | 01 | F.01U.330.704
2 Ω
1 5200 W
17.2 kg (37.8 lb)
2.7 Ω
6000 W
210 V
84 A
32.0 dB, adjustable 24-40 dB
13.7 dBu (3.73 V), adjustable 5.7-21.7 dBu
< 0.05 %
< 0.15 %
< 0.15 %
< -80 dB
20 Hz to 20 kHz (±1 dB)
Class D, fixed frequency
< -70 dBu
< -73 dBu
Installation manual
TGX 4-Channel Power Amplifier
4 Ω
5000 W
4
peak
peak
> 400
115 dB
118 dB
Bosch Security Systems, Inc.
8 Ω
2500 W