Dynacord TGX10 Installation Manual page 26

26 en | Technical data
Format
Input Sample Rates
Thru Connector
Network
Type
Format
Network Audio Inputs
Network Audio Outputs (Monitor)
Front side Service Port
Mains Input
Speaker Output
GENERAL
User Interface
Display
Front panel indicators
Front panel operating elements
Rear panel indicators
Rear panel operating elements
Power Requirements
Power Consumption
Rated Power Consumption
1/8 Maximum Output Power at 4 Ω
Idle Mode (no input signal)
Standby Mode
Power Supply Topology
Protections
Cooling:
Ambient Temperature Limits
IEC Protection Class
Electromagnetical Environment
Color
2018.05 | 01 | F.01U.330.704
32 to 192 kHz, internal Sample-Rate-Converter
active buffered, direct bypass if device is unpowered
2 x Neutrik etherCON/RJ45, redundant PRIMARY/SECONDARY
1000base-T/100base-TX, integrated switch
8 channels, 48/96 kHz, OMNEO/Dante format
2 channels, 48/96 kHz, OMNEO/Dante format
320 x 240 pixel, 3.5" color TFT
Full color LED illuminated ring
Rotary encoder, Capacitive Touch Screen
2 x LED (AES3 Input mode active, Amp-Find)
100 V to 240 V, 50 Hz to 60 Hz AC
Switching Mode Power Supply with digital controlled Power Factor
Audio Limiters, High Temperature, DC, HF, Short Circuit, Back-EMF, Peak
Current Limiters, Inrush Current Limiters, Turn-on Delay, Mains Circuit
Breaker Protection, Mains Over/Under voltage Protection
Front-to-rear, temperature controlled fans, supervised
+5 °C to +40 °C (+40 °F to +105 °F)
Installation manual
AES3 (AES/EBU)
1 x USB Type A
1 x Neutrik powerCON-HC
4 x NL4
Mains switch
2250 W
2850 W
110 W
< 19 W
Correction
Class I (grounded)
E1, E2, E3
Black
TGX 4-Channel Power Amplifier
Bosch Security Systems, Inc.