Table of Contents
Advertisement
14
en | Controls, indicators, and connections
6
Controls, indicators, and connections
6.1
Front panel
Amplifier set up, configuration, and monitoring via the touch screen, encoder or the dedicated
remote control software.
Figure 6.1: TGX front panel
1.
2.
3.
6.2
Rear panel
Figure 6.2: TGX rear panel
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. XLR thru for analogue inputs and AES3, channels A, B, C, D.
11. SECONDARY OMNEO/Dante network connector (etherCON/RJ45).
AES3 inputs/outputs for audio channels A/B [5 & 10] on connector B, for channels C/D on
connector D.
2018.05 | 01 | F.01U.330.704
Full color 3.5" capacitive touch screen.
USB service port.
Encoder with multi-color light ring.
1
2
7
8
Power ON switch.
Ground contact.
NL4 audio outputs for channels A, B, C, D.
FAN - Exhaust air vent for amplifier cooling. Do not obstruct!
XLR for analogue inputs and AES3 (switchable) channels A, B, C, D.
PRIMARY OMNEO/Dante network connector (etherCON/RJ45).
Mains power connector (for powerCON32).
Exhaust air vent for power supply cooling. Do not obstruct!
LEDs for AES input active and amplifier find function.
1
2
3
4
Installation manual
TGX 4-Channel Power Amplifier
3
5
6
9
10
11
Bosch Security Systems, Inc.
Advertisement
Table of Contents
