Dynacord TGX10 Installation Manual page 13

TGX 4-Channel Power Amplifier
Figure 5.1: Power amplifier ventilation
Caution!
Blocking/closing the power amp's ventilation louvers is not permissible. Without sufficient
!
cooling/ventilation, the power amplifier may enter protect mode.
Keep ventilation louvers free from dust to ensure unhindered airflow.
Notice!
Do not use the power amplifier in direct sunlight or near heat sources, like heater blowers,
stoves, or any other heat radiating devices.
Notice!
Do not use the power amplifiers in an environment where temperatures are below 5 °C (41
°F) or exceed +40 °C (104 °F).
For fixed amplifier installations in a device control room that incorporate a central air-cooling
system or air conditioners, calculating the maximum heat emission may be necessary.
See also
–
Bosch Security Systems, Inc.
Mains operation & resulting temperature, page 27
Installation manual
Installation | en 13
2018.05 | 01 | F.01U.330.704