Receipt Control; Meaning Of The Symbols; Hints For Usage - janitza Prophi Operating Instructions Manual

Reactive Power Controller

Receipt Control

In order to ensure a perfect and safe use of the device, a
proper transport, expert storage, erection and mounting
and careful usage and maintenance are required. When
it may be supposed, that a safe operation is no longer
possible, the device has to be put out of service and be
protected against unintentional putting into service.
A safe operation can no longer be assumed, when the
device
• shows visible damage,
does not work in spite of intact net supply,
has been exposed to disadvantageous conditions for a
longer time (e.g. storage out of the allowed climate
without adaption to the room climate, dew etc.) or trans-
port use (e.g. falling from great height, even without
visible damage).
Please test the contents of delivery for completion, be-
fore starting the installation of the device. All delivered
options are listed on the delivery papers.
In the attached description doc. no.: 1.020.030.x all de-
livery types and options for the reactive power control-
ler Prophi are listed.
Attention!
m
This manual also describes options and
types, which were not delivered and there-
fore, do not belong to the contents of deliv-
ery.

Meaning of the symbols

c
Warning of dangerous electrical voltage.
This symbol shall warn you of possible dangers, which can occur during maintenance, putting into service
m
and while usage.
Protective wire connection
Page 4

Hints for usage

Safe and failure free operation can only be granted,
when the device is operated according to this manual!
This device may be put into service and used by quali-
fied personnel according to the safety regulations and
instructions only. Please mind the additional legal and
safety regulations for the respective application.
Qualified personnel are persons, familiar with erection, mounting,
putting into service and usage of the product and having the qualifi-
cations such as:
education or instruction / entitlement to switch, re-
lease, ground or characterize current circuits and de-
vices according to the standards of safety techniques.
education or instruction in the care and usage of suit-
able safety equipment according to the standards of
safety techniques.
= Key 1 = Key 2 = Key 3