Table of Contents
Advertisement
1VAC388793-MB A
5.1.1.2
TCC300
User Manual
Level 1 Access Code Pres ENT to change
4.
Press the ENT pushbutton. If prompted, enter a valid Level 2 Access Code. The
following will be displayed:
Change Access Code 000000
When entering the new user access code the display will
automatically advance the cursor to the next digit when input is
momentarily paused.
5.
Utilizing the arrow pushbuttons, enter the new Level 1/Level 2 User Access Code,
then press the ENT pushbutton. The following will be displayed.
Access Code Updated
As soon as ne w User Access Codes are entered, they will be required to change any
setpoint or configuration parameter.
Setting level 1 or level 2 user access codes from TCC600
1.
Select Utility/Change User Access Code from the TCC600® toolbar. TCC600 will
display the "Change User Access Code" dialog screen.
GUID-6AA2119F-CDBB-45CB-B614-80C0ABDE6AFC V1 EN
Figure 203:
Change User Access Code Dialog Screen
2.
Input a new Level 1/Level 2 six digit alphanumeric User Access Code.
3.
Input the User Access Code from Step 2, in Confirm New User Access Code.
4.
Select Save. TCC600 will display a "Save to Device" confirmation screen.
Section 5
System setup
257
Advertisement
Table of Contents
