Table of Contents
Advertisement
Section 3
Operation
3.17.7.1
100
Saving clone to a smart flash SD card
1.
Insert the Smart Flash SD Card (that has adequate space available) into the control
as previously described.
2.
Press the Right Arrow (COMM Hot Button) pushbutton. The control will display the
"Memory Card" menu.
3.
Press the Down pushbutton arrow as necessary to navigate to the "Clone Save" menu
item.
4.
Press the ENT pushbutton. The control will respond with a "confirmation" screen.
Confirm press ENT
Cancel press EXIT.
5.
Press ENT. The control will respond with a "Enter file name" prompt screen with the
cursor under the far left position.
6.
Determine if any found DNP Configuration and Multi-user Password files are to be
included in the Clone Save and proceed as follows:
•
If found DNP Configuration and Multi-user Password files are to be included
in the Clone Save go to Step 10.
•
If found DNP Configuration and Multi-user Password files are not to be
included in the Clone Save go to Step 7.
7.
Utilizing the arrow pushbuttons enter the desired file name, then press ENT.
8.
When the file has been saved to the Smart Flash SD Card, then the control will
display the following "confirmation" screen:
File Saved!
Any key to continue
9.
Press any key. The display will return to the "Clone Save" screen. No further action
is required.
10. To include found DNP Configuration and/or Multi-user Password files in the Clone
Save, Do Not change the default file name displayed by the control.
11. Press "ENT". The control will display the following sequence of screens:
Saving data XXXXXXXXX
Saving... DNP CFG File
If DNP Configur ation file does not exist on the control the following will be
displayed:
DNP CFG File doesn't exist!
Saving... Multi-user Password
If Multi - user Password File file does not exist on the control the following will be
displayed:
Multi-user Pass File File doesn't exist!
File Saved! Any key to continue
12. Press any key, the display will return to the "Clone Save" screen. No further action
is required.
1VAC388793-MB A
TCC300
User Manual
Advertisement
Table of Contents
