Section 7
Setpoints
538
GUID-6A8E37E4-305B-47A3-8B69-8F2792EE95C1 V1 EN
Figure 427:
Setpoints Dialog Screen
Selecting "Undo/Refresh" only affects the displayed profile.
Editing Setpoints in the wrong Setpoint Profile can cause the control
to operate incorrectly.
2.
Select the desired Setpoint Profile, then from the "Forward Power" and/or "Reverse
Power" section of the Setpoints dialog screen enter the desired Definite (Inverse)
Delay Fwd or Rev value (1 to 360 Seconds in 1 Second increments).
Selecting "Save" saves all profiles to the control.
3.
Select Save. TCC600 will display a "Confirm Writing to Device" confirmation
screen.
1VAC388793-MB A
TCC300
User Manual