Driver Server Proxy Settings Dialog Box; Driver Update Screen - Qlogic QLA200 HBA User Manual

Step 8. One of the following dialog boxes displays:
FL0054601-00 B
3 – SANsurfer HBA Install Wizard (Windows 2000/Server 2003)
If you select the From the QLogic website button and your system
❑
has a proxy server, select the Specify Proxy Settings check box. The
Server Proxy Settings dialog box displays
Figure 3-8. Driver Server Proxy Settings Dialog Box
Select the Use the following HTTP proxy setting check box.
❑
Enter the server name and address in the Address box. For
❑
example:
proxy.mylan.com or
10.0.2.1
Enter the port number where the server software is monitoring. Valid
❑
values are in the range 0–65535.
Click Continue to proceed with the driver installation. The Driver
❑
Update screen displays while the system installs the driver
figure 3-9).
Figure 3-9. Driver Update Screen
If the driver is installed successfully, the following Update Status dialog
box displays (see figure
Figure 3-10. Install Status (Successful) Dialog Box
3-10). Click OK.
Installing the Driver
(see figure 3-8).
(see
3-5