1 – Introducing the QLA200
System Requirements
1.4
System Requirements
Your system must have the following functionality to support the QLA200 HBA:
One of the following:
■
❑
❑
3.3-volt signaling (5-volt tolerant)
■
The correct media (short wave 50µm fiber or 62.5µm fiber) and connectors
■
(LC duplex)
1.5
Installing the QLA200 HBA and Driver
Installing your QLA200 HBA is quick and easy:
First, install the QLA200 HBA according to the directions in
Second, install the software driver according to the directions in the section that
corresponds to your computer's operating system:
Windows
Red Hat/SuSE
Novell NetWare
1-4
PCI 32-bit data and 33/66 MHz clock frequency
PCI-X and 66/100/133 MHz clock frequency
Operating System
2000/Windows Server 2003
Linux
section
Section
3
4
5
2.
FL0054601-00 B