3.3
Updating the Driver
Perform the following steps if a Windows 2000/Server 2003 driver is already installed
and you want to install an updated version of the driver:
NOTE
Step 1. Insert the SANsurfer Fibre Channel HBA Software CD in an appropriate
Step 2. Click Drivers and Application. The SANsurfer HBA Software screen
Step 3. In the table titled 2Gb FC - QLA200 Series, click the appropriate operating
Step 4. In the table titled 2Gb FC - QLA200 Series, click Click Here to Install.
Step 5. You can run the SANsurfer HBA Install Wizard from the CD. Optionally,
Step 6. The HBA Configuration Update dialog box displays.
Step 7. Click Update Driver. Continue with
FL0054601-00 B
3 – SANsurfer HBA Install Wizard (Windows 2000/Server 2003)
You must have internet access if you want to update the driver from
the QLogic web site.
drive. The SANsurfer Fibre Channel HBA Software screen displays.
displays.
system: Windows 2000 or Windows Server 2003. The SANblade Fibre
Channel HBA Management Software and Drivers screen displays.
The File Download dialog box displays.
you can download the wizard to the server and run it from there. Do one
of the following:
Click Open or Run to run the SANsurfer HBA Install Wizard from the CD.
❑
Click Save to download the application to the computer's hard disk. The
❑
Save As dialog box displays. Specify a location on the hard disk, then
click Save. From that location, double-click the installation file
qlflzip.exe.
The SANsurfer HBA Install Wizard starts automatically. If the wizard does
not start and you are running the wizard from the CD, do the following:
Select the drive where the SANsurfer Fibre Channel HBA Software CD
❑
is located.
In the \data\files\windows directory, double-click the installation file
❑
qlflinst.exe.
Updating the Driver
step 7
in
section
3.2.
3-7