Table of Contents
Advertisement
A – Compliance, Specifications, and Agency Certification
Transceiver Label
NVRAM
Onboard DMA
Frame buffer FIFO
Transceivers
Form factor
Operating power
Operating temperature
Storage temperature
Relative humidity (noncondensing)
Storage humidity (noncondensing)
A.3
Transceiver Label
The transceiver on the QLA200 HBA is a Class I laser product. It complies with
IEC 825-1 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be
operated under recommended operating conditions.
A-2
Table A-1. QLA200 Board Specifications (Continued)
Type
256 bytes, field programmable
Five-channel DMA controller: two data, one command, one
auto-DMA request, and one auto-DMA response
Integrated 4-KB transmit and 6-KB receive frame buffer FIFO for
each data channel
LC-style connector that supports non-OFC, multimode fibre optic
cabling using a small form factor optical transceiver module
11.99 cm × 6.44 cm (4.721" × 2.536")
Approximately 5 watts
Table A-2. QLA200 Board Operating Environment
Environment
CLASS I LASER PRODUCT
Specification
Minimum
0°C/32°F
–20°C/–4°F
10%
5%
Maximum
55°C/131°F
70°C/158°F
90%
95%
FL0054601-00 B
Advertisement
Table of Contents
